Convoy L6 flashlight ,XHP70 led inside

Convoy L6 flashlight ,XHP70 led inside
  • Продавец
  • Список ценUS $77.19piece
  • Продажная ценаUS $77.19piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,4 (673)

Oписание продукта


Body color

Host materialAluminum alloy
Lens materialGlass
Can stand or not Can
Mode memoryCurrent mode can be remembered if the flashlight is turned on above 2 seconds
Switch positionSide
Light Source modelCREE XML2 U2-1A
FluxAbout 1000lm
Battery includedNo
Battery type18650 or 26650,protected and unprotected all can be run on BD01
Battery quantity1PCS
Head diameter49.5mm
Body diameter32.3mm
Flashlight weight220g
Product total weight352g
Other accessoriescharger connector,USB to MicroUSB cable,EU adpater,18650 to 26650 ring*2


Note:battery is not include

How to customize your flashlight:

Now default we assemble 7135*8 in the flashlight,We support customization of LED tint.Pls contract with us if you want customization.And a little money will be added
Optional LED: XML2 U2-1A / XML2 T6-3B / XML2 T6-4C / XML2 T5-5B / XML2 T4-7A
XML2 T6-3B add $0.53
XML2 T6-4C / XML2 T5-5B / XML2 T4-7A add $1.4
XML2 U2-1A 6500-7000K
XML2 T6-3B 5000-5200K
XML2 T6-4C 4300-4500K
XML2 T5-5B 4000-4200K
XML2 T4-7A 3000-3200K
How to pay the extra money:
click following link,for example ,if you want customize led to T6-4C ,you need to pay extra $1.4,so after buying this flashlight,just order following item 140pcs and note your requirement under your order.
Flashlight protection function explanation:
(1)Mode memory function: if the flashlight is turned on more than 3seconds ,current mode can be memoried.Turn it off and then turn it on ,still the original mode.
if less than 3seconds ,Turn it off and then turn it on ,it goes into the next mode.
(2)Low voltage protection function: when the voltage of battery is 2.9-3.1V,the flashlight flashes 2times/sec with low brightness,it\\\\\\\\\\\\\\\'s a low voltage alarm.
(3)Battery reverse protection:if your battery is reversed,dont worry ,no any problem will happen.













Switch-direct-rechargeable series flashlight manual

Thank you for purchasing this product, please read this manual in detail before using this product .



Do not turn on the torch in front of people \\\\\\\\\\\\\\\'s eyes ! Otherwise it will cause temporary blindness !

You can find out the charge-state by observing the reflector.(Turn off the flashlight)


1. Features

1.This series of products use the following proprietary patented technology:" Integrated switch-direct-rechargeable structure" ( Patent No. 201320292675.9 ),and use high performance LED and intelligent driver.

2.In addition to energy efficient, durable , this flashlight has the following characteristics :

3.This flashlight can be recharged without removing the battery,you just connect the switch with the charge-connector,then use the USB to microUSB cable to connect the 5V power.

4.You can click the charge-connecter to make the flashlight work when charging.

5.Charge-connector firmly clasps the switch non-magnetically.

6.The driver has battery-protection and charging display function.

7.The driver is intelligent ,supplies constant current,has three lighting modes and two flash modes,has Low-voltage alarm function and memory function.

8.The pill is integrated the host to make the heat of LED spread faster.

9.The host is made of aviation aluminum.HA oxidative surface,good wear properties.

10.The reflector is made of aviation aluminum.Vacuum Coating

11.IPX-7 waterproof


2. Applications

This series of products have a wide range of applications, suitable for outdoor lighting , home lighting, emergency lighting and a long patrol lighting.


3.Flashlight structure and charging accessory diagram

The Switch is divided into two categories:side-switch and tail-switch

(see the following diagram).



4.Operating instructions


1.The battery installation:screw the tail,the put the battery in.Notice!Battery positive towards the torch head(side switch), Battery positive towards the torch tail (tail switch)

2.Charge:connect the switch with the charge-connector,then use the USB to microUSB cable to connect the 5V power.Notice!When charging is completed,unplug the microUSB port first ,then remove the connector.

3.Charging indicator:indicator emits red light when charging,emits green light when full charging.indicator in the reflector(side switch flashlight),indicator on the tail(tail switch flashlight)

4.Charging adapter:5V power.For example:phone adapter,PC USB port,mobile power etc.

5.Switch operating:click the button to turn the flashlight on or off.Gently click the switch to choose modes.the brightness depends on the current when the battery is low-voltage or turning on the flashlight in the state of charge

6.Modes:low-middle-high-stobe-SOS,the mode can be remembered if turnning on the flashlight above 4 seconds.

7.Low voltage alarm:when the voltage is below setting value, LED twinkles.the batteries must be charged at this time.

8.Battery storage:remove the battery from the flashlight if you dont use the flashlight for a long time.Battery should be full charged once every month if you dont use it chronically.


Maybe a little difference between the manul and the product,please adhere to the original products in case of any mistake!